Spares and reprints
When a display frame is still usable but one part is damaged, a spare usually costs less than replacing the full unit. We also handle reprints for the next expo run, with matching sizes for roll-up banners, flags, gazebos and pop-up backdrops.

What we replace and reprint
This service covers portable display items that already exist and need either a new printed face or a hardware part. Most requests are for roll-up banner cartridges, support poles, flag poles, flag bases, ground spikes, gazebo canopies, sidewalls and replacement graphic skins for pop-up walls. We can also reprint a full graphic when the old panel has faded, torn, curled at the edge or carries outdated pricing and contact details.
We do not build custom exhibition stands and we do not alter one system to fit another type of frame. The cleanest results come from matching the replacement part to the original display size and fitting style, so a few clear photos and measurements save a lot of trouble later.
- Roll-up banner graphics and selected hardware parts
- Feather flag and teardrop flag prints, poles and bases
- Printed gazebo canopies, side panels, ropes, pegs and weight options
- Pop-up backdrop replacement graphics for compatible frames
- Single replacement parts or a full refresh for the whole set
How the job moves from check to print
We start by checking what you have now. That means the display type, the visible size, the hardware condition and whether the item needs only print or both print and hardware. If the old graphic must fit an existing frame, we compare your measurements with the finished size required for that unit. On gazebo work, canopy shape and leg spacing matter as much as the printed roof area.
Once the size is confirmed, artwork is prepared or updated and the print run is booked. Hardware parts are packed separately where needed, while reprinted graphics are rolled, folded or boxed according to the product type. Before dispatch, the team checks eyelets, pole pockets, cassette fitting or tension points depending on the item. A rushed event week can expose small errors, so this stage is not skipped.
- Send photos of the current item from front, back and side
- Measure the visible print area and the overall hardware size
- Mark any broken part clearly, such as a foot, latch, pole or hub
- Approve artwork sizing before production starts
- Receive packed parts or prints by courier from Durban
What to prepare before you ask for pricing
The more exact the brief, the easier it is to quote the right part first time. For a roll-up banner, measure the graphic width and the full cassette width, then photograph the pole and top rail. For a flag, note whether it is feather or teardrop, the approximate assembled height and the base type currently in use. Gazebo requests need the roof size, usually 3 x 3 metres or another standard event footprint, plus photos of the frame corners and the old canopy if one exists. Pop-up backdrop jobs need the frame style and a photo of the way the graphic fixes to the structure.
If you have old artwork files, send those with the latest text changes. If not, a clear photo of the existing print still helps us identify the layout and size. Use our contact form and include delivery town, especially for outlying areas where courier cartons are handled a bit more roughly.
- Photos of the full item and close-ups of damaged parts
- Finished sizes in millimetres or metres
- Artwork files, or the nearest available previous version
- Delivery town and site type, indoor or outdoor
- Any event date that affects print and courier planning
How pricing is worked out
Prices depend on three things: the display format, the amount of hardware being replaced and the print area. A new banner graphic is usually priced by size and material, while a gazebo canopy includes a larger printed area, sewing and finishing. Hardware costs vary according to the part itself and whether the item needs a full assembly, such as a complete flag pole set, or only one damaged section.
Courier cost is separate because long cartons, weighted bases and bulky frame parts do not price the same way as a rolled print. A single replacement graphic can travel in a compact package, but a metal base or a gazebo frame takes more space and weight allowance. If measurements are uncertain and the wrong size is produced, the job often has to be remade, so accurate checking at the start keeps the spend under control.
For larger fleets of displays, mixed jobs can be grouped into one production batch. That helps when a team is refreshing several banners and flags for the next season rather than replacing one unit at a time.
Typical sizes and fit details
Most reprint work follows standard portable display sizes. Roll-up banner graphics commonly match 850 mm wide units and wider 1 500 mm units. Flag prints are sized to the pole shape and height, with a sleeve or pocket sewn to match the mast side. Gazebo canopies are cut to the roof span and valance drop of the frame, and sidewalls need the correct attachment method along the top edge. Pop-up wall graphics are matched to the visible face and the frame curve or straight profile.
Where an existing frame is older or from a less common batch, small differences in end caps, pole tips or fixing strips can matter more than the headline size. That is why we ask for photos and not just a rough width. Two units can both be called 850 mm, but the fittings may be different enough to cause a poor install.
- Roll-up banner widths commonly 850 mm and 1 500 mm
- Gazebo roof size often 3 x 3 metres
- Flag bases selected to suit indoor floors, paving, grass or sand
- Graphic finishing includes hems, sleeves, eyelets or cassette fitting strips
- Replacement parts must match the original frame style closely
Aftercare and storing parts between events
A replacement print lasts longer when it is packed dry, clean and square after an event. Coastal humidity around Durban can mark fabric and metal if units are left wet in a vehicle or storeroom overnight, so gazebo canopies and flags should be aired before bagging. Roll-up graphics should retract evenly with no grit in the base, and pop-up wall skins should be folded or packed exactly as intended for that frame.
Keep spare poles, pegs and brackets in labelled bags inside the main carry case. A lot of expo damage happens not on site but in transit, when loose metal parts rub against printed panels. If one section of a display has already been replaced, it helps to note that on the case for the next event team. Small habits like that reduce mix-ups and make the next setup far less frustrating even when the venue loading bay is chaos.
What our Event Display customers say
Verified Google reviews
Questions we get asked
Can you reprint only the graphic and keep my current hardware?
Yes, if the frame or cassette is still serviceable and the replacement print can be matched to the exact fitting style and finished size.
What if I do not know the model of my display?
Clear photos, the visible size and a few close measurements are usually enough to identify the format and check whether a spare part or reprint will fit.
Do you send spares outside Durban?
Yes. Parts and printed graphics are packed in Durban and couriered to Gauteng, the Western Cape, the Eastern Cape and other provinces.
Also worth a look




Tell us about the job
Send sizes, materials and where you are through our contact form, and we will come back with the practical options.
Open the contact form
